Support / FAQs / About techtown

Home Forums Archives what tile

  • what tile

    guest created 2 years ago 1 Member · 4 Posts
  • guest

    September 19, 2017 at 12:00 am

    How to hoop-up the purge switch , it have 2 wires red and black I took it out but forget

  • ectofix

    September 19, 2017 at 4:47 pm

    Two wires going to a switch that are different colors, so you don’t know which way they go?


    Hmmm…  That’s a tough one.


    Well, I suggest that you wire it according to the wiring diagram.  If you don’t have one, then I suggest that you call a service company.  

  • fixbear

    September 20, 2017 at 6:22 am

    Ahhh Ecto, doesn’t your magic ball tell you  what he’s working on.  LOL

  • fixbear

    September 21, 2017 at 10:11 am

    Off the top of my head,  You must be referring to a ICE model with the control panel inside on the left with a three position butterfly switch for power and a spring loaded butterfly for purge.  If I am correct on this, as you look at he switch back you have 3 terminals. You need the center and the one that the butterfly handle is  in on (down).  Easily checked with a ohm meter as the normally open terminals.  The center spade is common.

Log in to reply.

Original Post
0 of 0 posts June 2018