Support / FAQs / About techtown

Home Forums Archives vulcan VBP5

  • vulcan VBP5

     ectofix updated 10 months ago 1 Member · 9 Posts
  • guest

    Member
    February 1, 2019 at 12:00 am

    Not able to set temp. 

  • ectofix

    Member
    February 1, 2019 at 9:18 am
  • fixbear

    Member
    February 1, 2019 at 1:06 pm

    Give us bit more information.  Does the LCD light up at all?  Is it full of decriminalized water?  Does the humidity light come on when you turn on the humidity? 

     

    Turnoff all knob’s,  Open and close the door.  Turn-on and watch the screen. It show set temp for 3 seconds.  If you have nothing check your power and the curcuit breaker in the machine.

  • wingsup

    Member
    February 1, 2019 at 1:21 pm

    I have power, light comes on with some type of error message.  It is not a steam unit.

  • fixbear

    Member
    February 1, 2019 at 2:14 pm

    Some type of error message????  Like what does it say.  Most common is a thermistor error.  The sensing device that tells the computer what the box temperature is. 

  • wingsup

    Member
    February 4, 2019 at 9:08 am

    Message on the screen reads Prb.

  • fixbear

    Member
    February 4, 2019 at 10:19 am

    How about that.  My guess was right.  prb is a probe error.  You’ll need your ML number to get the right one due to electronic control model.  this is the service manual to help you replace it;

    https://www.partstown.com/vulcan-hart/vbp5i/manual/vh-vbp-iom?page=10.

  • wingsup

    Member
    February 4, 2019 at 9:00 pm

    Thank you for your help! Is ML number the model number?

     

    Thanks,

    Scott

     

    Sent from my iPhone

  • ectofix

    Member
    February 5, 2019 at 5:20 am

    wingsup wrote:

     

    Thank you for your help! Is ML number the model number?

     

    Thanks,

    Scott

     

    Sent from my iPhone

    No.  There should be a model (you already said it’s a VBP5), a serial number and a ML number on the data plate.

Log in to reply.

Original Post
0 of 0 posts June 2018
Now