Support / FAQs / About techtown

Home Forums Archives Harvest issues with a Manitowoc UY0310A

  • Harvest issues with a Manitowoc UY0310A

    guest created 1 year ago 1 Member · 4 Posts
  • guest

    October 15, 2018 at 12:00 am

    Ice will not release from evaporator even after moving ice thickness bridge float. Ice will come off after the 45 minutes time out. 

  • ectofix

    October 15, 2018 at 5:30 pm

    1st thing you should do is clean it using the chemicals and procedures outlined beginning on page 15 of this manual:

    Manitowoc UnderCounter Ice Machines – Installation, Use & Care Manual 


    There may be an almost indiscernible coating of lime scale that’s causing the ice to hang up.  Make sure you use only Manitowoc ice machine cleaner and sanitizer.  Follow the cleaning procedures to the letter.


    BTW:  The machine should be cleaned a minimum of once every six months.  More frequently if your water quality is poor.

  • fixbear

    October 15, 2018 at 7:41 pm

    The harvest is facilitated by the hot gas solenoid heating the evaporator in the harvest cycle. Also when Harvest starts the water sump should drain..  What is the ambient temp that the unit is in.  The U machines will NOT work below a 65 F.  Nor will they work if dirty.or not level.

  • fixbear

    October 15, 2018 at 7:53 pm

    Oh, and your float switch is what triggers the harvest cycle.

Log in to reply.

Original Post
0 of 0 posts June 2018