Support / FAQs / About techtown

Home Forums Round up miracle steamer.  Control panel and rely flashing.  Both new parts.

  • Round up miracle steamer.  Control panel and rely flashing.  Both new parts.

  • guest

    Member
    April 30, 2018 at 12:00 am

    Round up miracle steamer has new control panel, transformer, hi limit, and relay.  Control panel and relay are flashing.

  • fixbear

    Member
    April 30, 2018 at 2:06 pm

    model number?

  • ectofix

    Member
    April 30, 2018 at 5:22 pm

    YES! Like fixbear said!

     

    Since their website lists twenty-three different models of the Antunes line of steamers, knowing YOURS would be extremely helpful.

     

    Your question is EXTREMELY vague.

    • Why did you replace all those parts?
    • Was it doing the same thing BEFORE you replaced them?
    • Does the steam generator feel like it’s getting warm?
    • WHAT on the control panel is FLASHING?  ALL of it…or just the green light at the top?

     

    There are potentially more questions.  The fact is that you have over $500 in new parts in it and they didn’t fix your problem. 

    Did a service company do that…or did you do it yourself? 

     

    As for a flashing “control panel”, nothing in the two (out of twenty-three) OWNERS MANUALS I bothered to peruse…says anything about something flashing – EXCEPT: 

     

     

    If the generator tests bad, a new one costs over $400.  It’s a little more challenging to replace than those other parts that were put in it.  Then your pushing the $1000 mark in parts alone (assuming you DIYed it) to repair a $1500-1700 steamer.

    Hopefully you’re getting your parts at a discounted rate (Sonic Drive-in?) and your parts cost is lower.

Log in to reply.

Original Post
0 of 0 posts June 2018
Now