Support / FAQs / About techtown

Home Forums Archives how do you remove the bottom cover on the over to access the information plate?

  • how do you remove the bottom cover on the over to access the information plate?

     guest updated 1 year, 8 months ago 1 Member · 3 Posts
  • guest

    Member
    March 14, 2018 at 12:00 am

    How do you remove the bottom cover to access the information plate?

  • guest

    Member
    March 14, 2018 at 1:05 pm

    two screws on the top of the plate

  • fixbear

    Member
    March 14, 2018 at 4:38 pm

    https://is.shotfarm.com/viewer/index.html?p=5716_26377_76417789It all depends on the make and model of machine/equipment you are working on.  If you are referring a to a Imperial kitchen range, it will either have 2 screws that hold it on,  or snap pins. Or 4 pins with hooks.   If you don’t find any screws on the face or bottom,  First push in and lift.  If it rises about 1/4 inch you can now just lift it out while keeping it up.  Use both hand, one on each end.  If it does not slide up, it will be snap pins.  Just reach under it with a hand on each end and give a light tug outward..  Do not pull out one end, as you will bend the pins.

     

    Go here and you will see a interactive picture of the kick plate.  You can slide you mouse to rotate, then click on the picture to blow it up.  That way you will see how it hooks if you have a IR series.

     

    Ikick plate

Log in to reply.

Original Post
0 of 0 posts June 2018
Now