Support / FAQs / About techtown

Home Forums Need part for my hobart welder model titan 7000 serial # 194WR02049 spec.# 9p7142-001

  • Need part for my hobart welder model titan 7000 serial # 194WR02049 spec.# 9p7142-001

  • guest

    Member
    October 4, 2017 at 12:00 am

    The idle speed is too high . throttle solenoid goes in if I push with my finger only. I need a new solenoid I think there’s a dead spot on the idle. 

  • john

    Member
    October 4, 2017 at 2:09 pm

    Hello juliusceasar and welcome to TechTOWN!

     

    So, I imagine you came to us through a search for Hobart, which is great, except we only work with Hobart’s foodservice line. Hobart Welders is owned by ITW, just the same as Hobart foodservice, but there’s not really an overlap in parts.

     

    I did find another forum on the web just for Hobart Welders, so hopefully you will have some luck there!

     

    Weld Talk Message Board and Online Forum – Hobart Welders 

     

    Additionally, I tried to run a manuals search on their site, but came up empty. The site says if the search comes up empty, you should contact literature@millerwelds.com to see if they have a manual for you.

     

    I hope this helps!

     

    -John

Log in to reply.

Original Post
0 of 0 posts June 2018
Now