Support / FAQs / About techtown

Home Forums Archives Model 6151-s delfield  code reads -33f box sensor or sensor failed  check wiring repair or replace

  • Model 6151-s delfield  code reads -33f box sensor or sensor failed  check wiring repair or replace

    guest created 1 year, 7 months ago 1 Member · 2 Posts
  • guest

    Member
    March 21, 2018 at 12:00 am

    What does all this mean , why can’t I find parts .

  • fixbear

    Member
    March 21, 2018 at 11:28 am

    The minus 33 means that the freezer has not gone into defrost and is froze up the evaporator coil. Turn your energy saver off and turn the machine off. wait ten seconds and turn on.  Machine should now go into defrost for about 15 minuets. If it now gets a E code, Ohm out the thermistors. If it never defrost’s,  You need to check the heater control relay and the heater wiring.  You can ohm it out at the controller. When without power before repowering.  Then check for voltage at repower to the heater.

     

       As for finding it,  Unfortunately Delfield only provides a kit. not individual.  found here:  http://www.partstown.com/delfield/del2194812kt-s

Log in to reply.

Original Post
0 of 0 posts June 2018
Now