Support / FAQs / About techtown

Home Forums Archives Hobart C-44a automatic setting will not cut machine off. there are three “timers” in control box, which one to replace for controlling automatic shutoff?

  • Hobart C-44a automatic setting will not cut machine off. there are three “timers” in control box, which one to replace for controlling automatic shutoff?

     fixbear updated 2 years, 3 months ago 1 Member · 5 Posts
  • guest

    Member
    February 16, 2018 at 12:00 am

    Stop the Machine

  • ares

    Member
    February 16, 2018 at 1:41 pm

    Part 00-892107 I have replaced for similar reason in past. Machine never goes into idle mode when set to automatic setting.

  • fixbear - ADK NY

    Member
    February 17, 2018 at 6:14 am

    There should be a schematic inside the machine cover.  But I have one question, are the reed switch accuators returning correctly?

  • ectofix - Nashville

    Member
    February 17, 2018 at 6:35 am

    fixbear wrote:

     

    There should be a schematic inside the machine cover.  But I have one question, are the reed switch accuators returning correctly?

     

    My thoughts as well.

  • fixbear - ADK NY

    Member
    February 17, 2018 at 6:56 am

    It wouldn’t be the first one with siverware stuck in it.

Log in to reply.

Original Post
0 of 0 posts June 2018
Now