Support / FAQs / About techtown

Home Forums Archives compressor won’t start up on Manitowoc ice machine

  • compressor won’t start up on Manitowoc ice machine

    guest created 3 years, 11 months ago 1 Member · 6 Posts
  • guest

    Member
    November 10, 2015 at 12:00 am

    Why won’t the compressor start up on model SD0452A Ice machine

  • abialas

    Member
    November 11, 2015 at 11:54 am

    Hi jkryzr,

     

    The list of reasons can be very extensive even contacting Manitowoc’s tech line direct would most certainly be a waste of time because of this. Best option would be to call a service tech out to look at.

     

    Thank you,

    -Anthonie Bialas

  • fixbear

    Member
    November 12, 2015 at 11:20 am

    Nugget, flake, or cube machine?

  • fixbear

    Member
    November 12, 2015 at 1:41 pm

    Regardless, sounds like the power switch is in the clean mode or the curtain is not closed on the reed switch. It could also be the high head reset (Red button next to the ice plate)

  • ectofix

    Member
    November 15, 2015 at 6:06 pm

    It’s a self-contained, air-cooled full-dice cuber.

     

    My bet is on the magnet that’s broken off of the curtain.  Nevertheless, for the typical lack of feedback from those wanting help here, we shall never know.

  • alnelson

    Member
    November 15, 2015 at 6:09 pm

    It’s been five days. Looks like another one post wonder.

     

    Hopefully the OP either figured out the problem or called for service.

Log in to reply.

Original Post
0 of 0 posts June 2018
Now