-
blodgett pizza ovens 1048B
Does anyone know if I can calibrate these pizza ovens. I have 4 and 3 are low and 1 is high. I want to calibrate if I can. any suggestions?
-
2 Replies
-
Does your thermostat look like this?
-
if so
1. Place the sensing probe of the test instrument in the middle of the oven.
2. Light main burner and set the temperature dial to 400 degrees. Allow the oven to heat until the
burner flame cuts down to bypass. Check temperature on the test instrument. If temperature
does not read within 15 degrees of the dial setting, recalibrate as follows:
3. Without turning, pull dial straight off.
4. Hold the calibration plate and loosen the calibration lock screws until the plate can move
independently of the control.
5. Turn the calibration plate so that the reading on the test instrument is in line with the indicator
mark. Hold plate firmly and tighten screws
FD THERMOSTAT
-
Log in to reply.