Support / FAQs / About techtown

Home › Forums › General › Cannot budge product plate on Berkel 827A.

  • Cannot budge product plate on Berkel 827A.

    Posted by Anonymous on November 10, 2022 at 4:24 am

    Have tried to muscle it to the “home” position, didn’t work. Tried cleaning everything, didn’t work. Tried lubing,. Didn’t work. Help!

    fixbear replied 4 years ago 2 Members · 2 Replies
  • 2 Replies
  • fixbear

    Member
    November 10, 2022 at 6:19 pm

    As I recall, the 827A is a manual carriage machine. So the only thing can be the sleeve bearings that the carriage slides on not clean and properly lubed with the right lubricant. The carriage rides on a round shaft with springs on each end and bronze bushings inside the ends. It also rides on a square bar to the side to prevent twisting. I suggest you remove the bottom cover and look for corrosion on the two bars. The carrage has a oil hole in the top of the round bar, but also needs lubrication of the square bar. Cleaning chemicals will cause corrosion inside that you can’t see if not lubricated.

  • fixbear

    Member
    November 10, 2022 at 6:52 pm

    I just realized that you may be talking about the “Index Plate”. In that case, there is a cam behind the knob that slides the index. Now depending in the serial number there are 2 different designs. Basically, the mount for the plate has to slide on a shaft that is moved by a pin that is in the cam. Again, Lubrication and clean parts are needed for it to operate smooth and easy. If the knob will move slightly back and forth, it will be inside the mount bearings. But look for the cam to be damaged as well. Before you start, you may want to obtain some Lubriplate 105 white grease and light machine oil. Some Kroil oil penetrate may also be helpful to break things free.

Log in to reply.