-
Convotherm C4 eD 10.20 GS -N
Error code 60… took circulation pump apart to make sure it spun freely. But pulls also 1amp(should be .4).. as I was driving home I wondered if spray nozzle could be plugged.. I did order new pump but could I be missing something? Only shows code in last 3 minutes of clean cycle. Thanks
-
1 Reply
-
What software version do you have. Needs to be 2.8.3 or higher as below that had cleaning water flow sensing problems.
<ul jscontroller=”mPWODf” jsuid=”JkVLwd_y” data-sfc-cb=”” data-complete=”true” data-processed=”true”>
<strong jscontroller=”zYmgkd” jsuid=”JkVLwd_18″ data-sfc-cb=”” data-complete=”true”>Blockages: Grease or debris may be blocking the cleaning-agent piping, preventing water from moving through the system. <strong jscontroller=”zYmgkd” jsuid=”JkVLwd_11″ data-sfc-cb=”” data-complete=”true”>Circulation Pump Issue: The circulation pump may be jammed or failing.<ul jscontroller=”mPWODf” jsuid=”JkVLwd_12″ data-sfc-cb=”” data-complete=”true”>
<strong jscontroller=”zYmgkd” jsuid=”JkVLwd_15″ data-sfc-cb=”” data-complete=”true”>Fix: Open the door and use the recoil hand shower to thoroughly rinse the cooking chamber. <strong jscontroller=”zYmgkd” jsuid=”JkVLwd_1i” data-sfc-cb=”” data-complete=”true”>Interrupted Power/Switching: The appliance may have been briefly switched off or experienced a power fluctuation during the cycle. <strong jscontroller=”zYmgkd” jsuid=”JkVLwd_26″ data-sfc-cb=”” data-complete=”true”>Check Water Supply: Ensure the water connection is supplying cool water, as hot water circulation can sometimes trigger this fault.
Log in to reply.