Support / FAQs / About techtown

Home Forums I have a Koolair Refrigerator Model MK 26GD

  • I have a Koolair Refrigerator Model MK 26GD

  • guest

    Member
    April 14, 2017 at 12:00 am

    I need to know were the DC driver is located for the LED light.

  • olivero

    Member
    April 14, 2017 at 5:30 pm

    Follow the wires back?

  • ectofix - Nashville

    Member
    April 14, 2017 at 6:51 pm

    Kool-Aire is a product of Manitowoc Ice (a Welbilt product).  There’s not much technical or parts info about Kool-Aire available at their website, except for their ice machines.  KoolAire isn’t a very prolific product in the market.

     

    Although it’s no help, here’s a spec sheet I found on the cooler you’re asking about:

    MK-26GD One-section Glass Door Cooler

     

    I suggest contacting them directly for the information you seek.  Check this link:

    Kool-Air Contact Information

  • fixbear - ADK NY

    Member
    April 15, 2017 at 12:13 pm

    There was a bunch of these special built for Coke.  They have floor sensors to sense foot traffic, A memory to lean the location operation times and traffic,  and a cutback system to save energy during non use times. The ECDM motors are also controlled to save and operate at variable speed. During high capacity they tend to be noisy.  The lighting also cut’s back without foot traffic.  I have yet to do any work on one, but has been in my customers shop for about 5 years.

Log in to reply.

Original Post
0 of 0 posts June 2018
Now