-
Hobart auto slicer
try to make this quick. We are working on a Hobart 2912B. The owner had someone replace microswitches and pcb board. It will allow to manually slice product but auto wont run. The home switch does have continuity to board from home switch. We can engage the carriage motor, but as soon as the carriage picks up arm and starts it slicing , it stops as soon as the home read switch is de energized. That should not be the case. We jumped the home switch and it will run as expected. The owner bought the pcb board form eBay. I think the board is bad out of the box. Anyone else with input would be greatly appreciated.
-
5 Replies
-
Is the reed switch 2 wires or 3?
-
Or the micro switch is wired wrong
-
Friggin’ website wouldn’t let me reply.
The attached manual might help. It’s available at:
https://www.hobartservice.com/
Hobart-Slicer-2000-Series-Service.pdf 13 MB PDF - Click to view Copy Download Link
-
Then, of course, there’s THIS…just to be sure:
-
Thanks for your help! Ill let everyone know what I find.
-
Log in to reply.