Support / FAQs / About techtown

Home Forums Dish and warewashing Hobart LXiH running long

  • Hobart LXiH running long

     fixbear updated 2 months ago 3 Members · 3 Posts
  • halo10v2

    March 27, 2020 at 4:45 pm

    Anyone know why my Hobart LXiH would run about double the time it says it’s supposed to? Fixes are also appreciated.

  • ectofix - Nashville

    March 27, 2020 at 6:32 pm

    I believe that machine will extend a wash cycle if the booster heater hasn’t yet achieved its 190° set point within its programmed wash cycle time. The booster is designed for a 70° rise within that period, so check to be sure your incoming water temperature is at least 120°.

  • fixbear - ADK NY

    March 27, 2020 at 7:18 pm

    On Ectofix’s note, sometimes the water heater is a long way from the dishwasher. In those circumstances one should consider a hot water circulation system. Wether a 3 line or a return on cold is your decision, But it should be part of the evaluation of the site before install.

Log in to reply.

Original Post
0 of 0 posts June 2018