Support / FAQs / About techtown

Home Forums Welcome to techtown RATIONAL SCC WE61 ERROR CODE 35


     fixbear updated 1 week, 5 days ago 3 Members · 4 Posts
  • Prakash Dudakia

    September 12, 2021 at 12:06 pm

    The Rational oven's Ultra Vent not working. Comes up with Error code 35. Checked PCB fuses all 3. Also checked single phase power going in. No Led lit up Or flashing on PCB. Measured 12 Volts on the fuse adjacent to transformer on PCB. any one any idea what could it be?

  • nafets47

    September 12, 2021 at 7:45 pm

    Prakash, check the transformer. It should tell you how many volts you are supposed to get.

    I did not look at your specific machine. But my SCCWE62G requires 18v from the transformer and I was getting 6v which was one of my numerous issues.

    MY machine provides 18v and 240v from the transformer. Please check from the transformer to ensure that it is providing the correct amount of voltage. Good that you checked the fuses and are getting some power from there but you need to know what power you are supposed to be getting.

  • nafets47

    September 12, 2021 at 7:46 pm

    Rational SCCWE62G dead

    Check it out

  • fixbear

    September 13, 2021 at 2:05 pm

    Check the communication cable and connectors to the Ultra-vent.

Viewing 1 - 4 of 4 replies

Log in to reply.

Original Post
0 of 0 posts June 2018