Support / FAQs / About techtown

Home Forums General Rational SCC_WE 101 G steam issue

Tagged: 

  • Rational SCC_WE 101 G steam issue

    Posted by costinet on October 4, 2022 at 1:09 am

    Hello. I have some issue with a Rational SCC_WE, 101 on gas (GN20). In the function test everything is perfect, but in normal operation, on steam, it starts for a few seconds, then the flame generator from the boiler stops, and the lower one starts, from heating the baking chamber, and it stops at the set temperature on the boiler… I updated the software, I don’t have any errors during operation, but I don’t have any steam either. Thank you for fluture answer and help…

    bush replied 1 year, 5 months ago 2 Members · 1 Reply
  • 1 Reply
  • bush

    Member
    October 6, 2022 at 9:15 am

    in diagnostic mode, check clima info. if there is no data, try running a manual calibration. also make sure the battery is close to 3 volts.

Log in to reply.