Support / FAQs / About techtown

Home Forums The Hot Side Vulcan 36c door hinge replacement

Tagged: 

  • Vulcan 36c door hinge replacement

    Posted by Jprince on February 4, 2022 at 9:25 pm

    Anyone changed these before? It looks like the inner door needs to be removed to get the hinges out. Any info is greatly appreciated.

    Jprince replied 2 years, 1 month ago 3 Members · 5 Replies
  • 5 Replies
  • ectofix

    Member
    February 4, 2022 at 10:55 pm
  • ectofix

    Member
    February 4, 2022 at 10:59 pm

    Then there’s this:

    NEVERMIND. Tried uploading a manual but this platform still sucks and won’t let me do it.

  • fixbear

    Member
    February 5, 2022 at 12:21 pm

    The service manual has it on page 27

    • fixbear

      Member
      February 5, 2022 at 1:03 pm

      Also page 41 and 42 cover the door stop/roller. Don’t forget to take several different diameter bolts with you for spring safeties. Two each of 1/4,5/16ths, and 3/8 by 1 1/4 to 1 3/4 long to drop in the slots above the spring after opening the door and before lifting the spring out of the roller stop. You will have to split the door to replace the spring, Here is a parts book to see what your getting into. If the range has a right side convection control, you will have to remove that cover before the door.

  • Jprince

    Member
    February 5, 2022 at 9:11 pm

    Thanks all, new hinges were installed today, installing the hinges was no problem, the only problem was getting the door back on, old unit was probably out of square and made it difficult to get the bottom half inserted to the notch.

    Thanks again.

Log in to reply.