-
The two “L” terminals are line and should be hot 208 volts going into the switch. The two “H” terminals are the wires that go to the element. Not certain about the “P”. I believe it is for a pilot light to tell it’s on and not used.
The two “L” terminals are line and should be hot 208 volts going into the switch. The two “H” terminals are the wires that go to the element. Not certain about the “P”. I believe it is for a pilot light to tell it’s on and not used.
Please confirm you want to block this member.
You will no longer be able to:
Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.