Ames 2000b Installation

Installing equipment doesn’t need to be complicated or frustrating. Proper installation ensures compliance with safety codes and smooth day-to-day operations, so water systems can stay protected. This article will guide you through Ames 2000B installation steps, so you can protect any commercial water supply from contamination. With the right tools and techniques, you can install this double check valve assembly efficiently and safely.

How to Install an Ames 2000b Double Check Valve Assembly

Make sure to install the 2000b unit in an easily accessible area for testing and servicing. 

• Step 1 – Before starting any installation, make sure to check local codes for any requirements. 
• Step 2 – Turn off the system and depressurize the pipe where you'll install the unit.
• Step 3 – Thoroughly flush the lines to remove any foreign material from them. 
• Step 4 – Install a strainer to help prevent the disc from fouling, unless the backflow preventer is used for emergency/unused water lines like fire sprinkler lines. 
• Step 5 – Install the valve so that the flow arrow is pointing in the direction of the water flow.
• Step 6 – Install shut-off valves on the inlet and outlet ends.
• Step 7 – Connect the test cocks for testing the assembly.
• Step 8 – Secure all fittings and slowly open shut-off valves.
• Step 9 – Test the valve assembly and check for leaks or malfunctions.