Categories
< Back
Print
Cres Cor Heating Element Installation Instructions
bytechtown
Every Cres Cor oven is built for quality. However, sometimes parts need to be replaced. When the heating element goes out or isn’t working properly anymore, you need the right Cres Cor heating element installation instructions to get a new one in place. We can help with that.
Supplies
- New oven element
- Screwdriver
- Pliers
Top Heating Element Installation Instructions
- Step 1. Disconnect the oven from the power source.
- Step 2. Remove the oven racks and trays.
- Step 3. Using a screwdriver, remove the screws securing the top element to the oven.
- Step 4. Gently slide the element out of place, but be careful as it’s still attached to the wires.
- Step 5. Slide the wiring grips off the end of the element.
- Step 6. Connect the wires in the same order to the new element.
- Step 7. Screw the element into place.
- Step 8. Replace the oven racks.
- Step 9. Reconnect the power and test that the oven heats up.