How to Replace an Ultrafryer UltraGold Fryer Ignition Module

Getting a repair done right the first time is vital to ensure you aren’t called back. This video guide can help you ensure exactly that. We’ll show you how to replace an Ultrafryer UltraGold fryer ignition module so you can ensure the unit will run. 

Ultrafryer Fryer Ignition Module Replacement

• Step 1. Document connections – There are several wires that connect into the ignition module. Before you begin removing anything, take a picture of the connections so you can reference it during reassembly. 
• Step 2. Disconnect the cables and wires – Disconnect the ignition cable and leads from the ignition module. You can use needle nose pliers to help carefully remove stuck ones.
  • Note: Be careful not to pinch or damage the wires or terminals. 
• Step 3. Unmount the module – Loosen the screws to unmount and remove the ground wire and ignition module from the unit.
• Step 4. Mount the new module – Mount the new module by reinserting the holes over the posts and securing it and the ground wires with the screws.
• Step 5. Reconnect the cables and wires – Referencing the image from step one or a wiring diagram, reconnect your leads and ignition cable to the ignition module.