Support / FAQs / About techtown

Skip to main content
Categories
< Back
Print

How to Perform Manual Valve Control on an Refrigerated Solutions Group LogiTemp Plus Controller

bytechtown

Trying to run a mode or setting on a unit you’re servicing? Struggling to navigate the controller menu? This guide will walk you through how to perform manual valve control on a Refrigerated Solutions Group LogiTemp Plus controller.

These steps are applicable to most Norlake and Master-Bilt refrigeration equipment such as their walk-in coolers. 

Running Manual Valve Control on LogiTemp Plus Controllers

This mode can be helpful for checking valve operation or other components throughout the system.

  • Step 1. Press and hold the BACK and down arrow button until the screen changes. The current valve setting will display.
  • Step 2. Push the up or down arrow buttons to change how far the valve opens or closes.
  • Step 3. Press the ENTER button to be able to change the setting incrementally.
  • Step 4. Press BACK twice to exit manual valve control and resume normal operations. 
Tags:

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .