-
need For model UR48DT condencer fan and motor part number
fixbear replied 7 years, 2 months ago 1 Member · 22 Replies
-
Is that a flat pan or a heated pan with legs? Send us a picture if you can.
-
it is heated pan. it is slide under the unit – and i need one asap
i be happy to join the form and help others
how you upload image?
-
Only registered users may upload images–here’s a link for you to register! https://techtown.partstown.com/login.jspa?registerOnly=trueÂ
-
Give me dimensions , voltage and wattage
Â
Is this pan aluminum casting with heater in the bottom or stainless with a clip and removable heater? If aluminum, it may have two plates on the sides that slide into a pair of slots.
Â
Also is it hard wire or does it have a plug.
check this on, as it is very common. RHS Refrigeration Hardware Supply CorpÂ
or like this. Traulsen SER-60636-00 KIT BOTTOM MOUNT CONDENSATE FL | Parts TownÂ
-
you rock the second link hit it on the head ! thank you
-
ok, they come in two versions, 32 oz 8oz evaporative and 56 oz 4 oz evaporative.
-
so now i need to measure how much O2 the old one can fill?
By the way no success with the condenser motor & fan, im going there today to get more labels and measure the fan diameter.
-
Just measure the pan dimensions. Make sure to note how many blades the fan has and hub type, size and rotation. If the complain is noise, it is probably just a motor bearing and the fan can be reused. Unless the hub is a sleeve with set screw, they tend to break loose from the hub due to improper crimp and misuse.. Most condenser fans today that size are hub mounted and don’t have that problem due to the rubber buffer between the fan and motor shaft/ face.
-
is it right what you wrote? 32oz or 8oz?
-
The 32 oz evaporates water at a rate of 8 oz per day. The 56 oz at 4 oz per day. Difference is the heater wattage ie; cost in power.32 are most common and fit under better. Pan has tappings for screws in the bottom for the slide in plates.
Â
  This is a common condenser fan motor. Master-Bilt 13-13101 CONDENSER FAN MOTOR, SPFBE912 | Parts Town If you click on the image, it will open a exploded image. Then slide to see the back. Then click several times to blow it up and you can see a normal motor rating. Today’s are all watt rated and have rotation as CW or CCW. Different brands call rotation from the shaft end or opposite shaft end. So make sure you check the blade rotation. The mounting pads are tapped for 4 screws that are self tap and come with new motor as well as a rubber isolation disc and a stamped spring nut that you snug with lineman pliers. do not over tighten as you will fold in the prongs on the nut. If you have a refrigeration house within 50 miles, they will be able to help you select a suitable replacement. It will not be OEM, but will function
Log in to reply.