Maxx ice MIM50 cutter not cutting ice

[ectofix]

I’d wondered about that.  I’d looked at the schematic, but have never serviced a Maxx Cold unit.

 

I saw no float switch for using water level to determine ice production (like Hoshi or Scotsman CM3s).  Nor did I see any so-called ice thickness control (like Manitowocs).

So I’m guessing a target evap outlet temp is achieved, followed by an adjustable timer (like Ice-o-matics).  In this case (Maxx Cold), the temp sensing and time to harvest are orchestrated by a controller?