-
STAR 28536TGA NEED SINGLE OR 3PH
Posted by guest on February 18, 2017 at 12:00 amhow to convert 3ph to single power
techjoeb replied 7 years, 2 months ago 1 Member · 2 Replies -
2 Replies
-
The model number you provided is no good, so I have no idea what equipment you’re asking about.
Â
Electrical power input options are usually depicted on the schematic. The schematic might be in the unit. If it’s not shown on the schematic, then it shouldn’t be attempted.
Â
Be aware that converting from three-phase to single-phase nearly doubles the amp draw through your supply circuit.
-
So the model I found was the 536TGA 28″. First and foremost, if you are not well versed in electricity, I strongly advise against rewiring this yourself. If you are technician and feel comfortable doing it, please see Ectofix’s warning about amp draw above. Now that I have said all that, here is the wiring diagram: http://download.partstown.com/is-bin/intershop.static/WFS/Reedy-PartsTown-Site/-/en_US/manuals/STA-515TGA_spm.pdf If you still have questions you might have to have someone help you with the rewiring. I hope this helps!
Â
-JoeÂ
Log in to reply.