Support / FAQs / About techtown

Home Forums Archives convection oven

  • convection oven

    Posted by guest on November 28, 2016 at 12:00 am

    what type of fuse and fuse holder do I need for a master 410 convection oven model# mco-e5

    john replied 7 years, 5 months ago 1 Member · 1 Reply
  • 1 Reply
  • john

    Member
    November 29, 2016 at 11:34 am

    Hello!

    According to my documents, the Master 410 is a full-size electric convection oven. However, the MCO-E5 is a half-size electric convection oven.

    With this in mind, is it possibly the MCO-ES? 

    Please verify by using the rating plate found on the left side of the oven exterior in one of these possible locations:

    IF it is a half-size MCO-E5:

     

    IF it is a full-size MCO-ES:

    Take a picture or write this information down, including voltage, you will need it later.

     

    If you have a Master 410, here is the manual:

    http://download.partstown.com/is-bin/intershop.static/WFS/Reedy-PartsTown-Site/-/en_US/manuals/GL-MCO-E-10_pm.pdf 

    This is where your rating plate will come in handy, because the Master 410 will have a different fuse depending on your exact model. See page 8 of the above manual to see the full parts list, but I included a snippet here:

     

    Again, this assumes you do have a Master 410, MCO-ES/ED-10/20. If you actually have an MCO-E5, this will not be accurate.

     

    I hope this information is useful.

     

    John

Log in to reply.