-
legacy ice machines
Can anyone remember what name Taylor used on there ice machine’s. They had a large round head and several plates around in a circle with a heavy spring actuator that tripped the plates about 3 inches on the outside for harvest. Harvest was a huge Bang that would scare a new server to jump.
-
2 Replies
-
I did some looking into the history of Taylor, it says they made ice machines under the name ITV Ice Makers, Inc.
ITV | Taylor AFSÂ
Is that what you were looking for? -
NO, that is today. This was in the 80’S just before they stopped in the mid 90’s The harvest mechanism was massive with a coil spring that had 5/16 wire coils. Heavier that some of today’s car suspensions. The leverage arm was a casting about 2.5 inches thick and over a ft long The condenser unit was special built and set in the middle of the evaporator.on top of the water cooled condenser.
Log in to reply.