Home›Forums›Archives›I have a Star SPDE2ARBL model cheese machine that is not heating. When I turn it on I am getting a blinking 0F alternating with the current temperature. Not sure where to look up the error codes
I have a Star SPDE2ARBL model cheese machine that is not heating. When I turn it on I am getting a blinking 0F alternating with the current temperature. Not sure where to look up the error codes
This machine has a very simple heating circuit. Power from the main board to a temp controller with thermo sensor and a heating coil protected by a high limit. Star by ohming out the thermister, checking for input voltage to the temp controller, terminals 4 and 7should be line voltage. And if the heating coil or high limit are open.
Please note:
This action will also remove this member from your connections and send a report to the site admin.
Please allow a few minutes for this process to complete.