Support / FAQs / About techtown

Home Forums Archives msd-1 convection oven the wiring diaram is confusing do you have abetter diagram than the one in owners manual

  • msd-1 convection oven the wiring diaram is confusing do you have abetter diagram than the one in owners manual

    Posted by guest on February 15, 2017 at 12:00 am

    replaced three position switch and door switch and wired as the owners manual showed but not working correctly

    fixbear replied 7 years, 2 months ago 1 Member · 2 Replies
  • 2 Replies
  • techjoeb

    Member
    February 15, 2017 at 1:55 pm

    Here is the service and parts manual: http://download.partstown.com/is-bin/intershop.static/WFS/Reedy-PartsTown-Site/-/en_US/manuals/AMR-Majestic_spm.pdf refer to pages 14-16. 

     

    -Joe 

  • fixbear

    Member
    February 15, 2017 at 7:42 pm

    Are you referring to the main Cook/Cool switch? If so I can see the confusion as you have 3 red wires that go to different places. center terminal gets brown. On the same side the terminal that is oppisite of the side you push for cook gets the red that goes to the door switch normally open (no). The other red on that side also goes to the door switch on the normally closed terminal (nc). make sure the door switch white is on the common.

    Now the other side. Center terminal is the white wire. The cook side gets the red and the purple goes on the cool side. Remember that you are energizing the opposite terminals to the side you push down.

     

    Hope this helps.

Log in to reply.