Support / FAQs / About techtown

Home Forums Archives Anyone have an idea on what US Range gas supply lines OEM diameters are ? To be more specific the larger aluminum supply line is either 3/8ths -7/16ths. Stove built in 50’s or 60’s

  • Anyone have an idea on what US Range gas supply lines OEM diameters are ? To be more specific the larger aluminum supply line is either 3/8ths -7/16ths. Stove built in 50’s or 60’s

     fixbear updated 3 months, 2 weeks ago 1 Member · 8 Posts
  • guest

    Member
    August 2, 2019 at 12:00 am

    The gas supply line I am referring to is the largest aluminum line on the stove. It connects to both the oven regulator and the stove top regulator.

  • olivero

    Member
    August 2, 2019 at 4:54 pm

    Can you measure the O.D?

  • guest

    Member
    August 2, 2019 at 5:04 pm

    The stove is out at a remote fly in only site on Kodiak Island. Can’t get

    any measurements. May have to bring both size lines out if I can’t narrow

    it down . It’s either a 3/8ths or 7/16ths line. The spring on the oven door

    wore a hold in the existing line. I have pictures.

  • olivero

    Member
    August 2, 2019 at 5:17 pm

    Don’t know that I can help you.

     

    I would just bring both sizes.

  • fixbear

    Member
    August 2, 2019 at 5:31 pm

    Are you sure it’s not 1/3 inch?

  • guest

    Member
    August 4, 2019 at 1:44 pm

    No I’m not sure if it is a 1/3 rd of an inch. Is that what US Range used

    back then ?

  • ectofix

    Member
    August 4, 2019 at 4:38 pm

    1/3″?  Was there ever such a size? I’ve never heard of that size fitting.

     

    7/16″ (compression) is an oddball too, but it’s still around in some commercial ranges.

  • fixbear

    Member
    August 5, 2019 at 3:36 am

    Dang, I could swear I hit a 2. Can’t tell you how much I hate vari len’s.

Log in to reply.

Original Post
0 of 0 posts June 2018
Now