The wrong voltage scenario is a common problem. As are crimps. Also verify you didn't install the GRAH elements which are higher output. If that is good, check the wire gauge versus total amp draw. There are online calculators and even apps that will recommend wire gauge for power.
This type of question is DEFINITELY an “end-user” inquiry.
The forum was supposedly designed for TECHS to draw from experiences of OTHER techs.
There are considerable and imminent risks if the info that is SUPPOSED to be used by skilled techs is awkwardly used by untrained people.
And the topics get way off focus.
Without standards, this great idea is dangerously broken.
So, I agree with you, fsm.
Report
There was a problem reporting this post.
Block Member?
Please confirm you want to block this member.
You will no longer be able to:
See blocked member's posts
Mention this member in posts
Invite this member to groups
Message this member
Add this member as a connection
Please note:
This action will also remove this member from your connections and send a report to the site admin.
Please allow a few minutes for this process to complete.