Support / FAQs / About techtown

Home Forums electric schematic for mixer General, model: Gem 110

  • electric schematic for mixer General, model: Gem 110

  • guest

    Member
    March 20, 2018 at 12:00 am

    #@

  • fixbear

    Member
    March 20, 2018 at 2:31 pm

    You marked this as answered, so I assume you found the one in the top cover..  Here is a manual for it.

     

    http://download.partstown.com/is-bin/intershop.static/WFS/Reedy-PartsTown-Site/-/en_US/manuals/GSL-GEM-100_spm.pdf

     

    Welcome to Tech town

  • roob429

    Member
    March 20, 2018 at 4:35 pm

    I couldn’t find a schematic for the wiring for the mixer on this download.

  • fixbear

    Member
    March 20, 2018 at 6:06 pm

    General doesn’t publish wiring diagrams due to many redesigns etc.  There should be one inside your machine.  Normally glued to the top cover.

     

    They are a very simple wiring. A normal on switch as the off, A normal off switch as the coil energizer, A normal closed micro as the shield safety. And a 4 pole contactor.  The red button and the micro are in series for coil power holding through one pole of the contactor. Green button powers the coil  directly when pressed only.  Then stop circuit holds it in.  Two poles of the rely power the motor.  Motor is a capacitor start, capacitor run with a centrifugal switch in the end.for starting

Log in to reply.

Original Post
0 of 0 posts June 2018
Now