-
Duke convection oven 101g no gas making it past pilot valve
So I bought this convection oven and simple did a propane conversion kit to it. Duke conversion kit used. No gas getting to pilot valve I have spark but no gas. Called duke tech said bad motor replaced motor . Still no gas . Replaced both valves still no gas replaced brain or motherboard that controls everything still nothing. Blew out gas tubes still nothing any ideas on what’s wrong with it thanks
-
2 Replies
-
It’s never a good idea to just swap parts without knowing what part is wrong. Or what connection. First off, get yourself a good DVOM. Does the cook light come on? Power for the ignition module comes from the temp controller, thru a 16 pin plug on pin 7 (Gray wire) to the blower safety switch. From the blower motor to the ignition module brown wire terminal L1. By testing voltage to the L2 at each point from the temp controller to the ignition module, you will narrow down the open.
Attached is a wiring diagram; DUK-613-E-SERIES_wd (partstown.com)
-
I forgot to ask you if it has 2 or 3 speed blower motor and mechanical or digital temp controller. What I described was for mechanical. But digital is close. Manual here: DUK-613-E-SERIES_spm.pdf (partstown.com)
Log in to reply.