fsm
Forum Replies Created
-
fsm
MemberNovember 18, 2015 at 10:12 am in reply to: Beverage Air KR48-1AS two door reach in, low suction pressure.Learn something new every day!
-
fsm
MemberNovember 18, 2015 at 10:12 am in reply to: Beverage Air KR48-1AS two door reach in, low suction pressure.Learn something new every day!
-
fsm
MemberNovember 17, 2015 at 9:00 pm in reply to: We have scc202model machine its newone unit its getting tripped while self testing at the water system checking timeRational is one of the best combi's available. That being said, in order to be an authorized service agent, technicians have to be certified by Rational to work on the units. These are very technologically advanced and require a knowledgeable technician to service the unit. If it is brand new, it comes with an excellent warranty and that warranty service will be provided by a Rational certified technician. It would be in your best interest to contact Rational directly.
-
fsm
MemberNovember 17, 2015 at 8:54 pm in reply to: My Scotsman FME504AS-1A runs and makes ice for 2 minutes then shuts down for 3 minutesIt is physically impossible to make ice after 2 minutes of operation in most commercial ice machines. Is it possible that the compressor runs for a few minutes, shuts off for a few minutes, then repeats? If so, you will definitely need an authorized service company to properly diagnose your issue.
-
“Our” indicates this is an end user. Call an authorized service agency.
-
Is your engine gas or diesel?
-
fsm
MemberNovember 17, 2015 at 8:22 pm in reply to: Beverage Air KR48-1AS two door reach in, low suction pressure.Doesn't sound like it's OEM… do you have pics? What is your head pressure? Sounds like when going from the smaller size to the larger size, expansion is occurring at this connection instead of in the evap coil as it should and could be causing a restriction. When you have a cap tube system, low suction indicates either a low charge or a restriction as you indicated.
-
fsm
MemberNovember 17, 2015 at 8:22 pm in reply to: Beverage Air KR48-1AS two door reach in, low suction pressure.Doesn't sound like it's OEM… do you have pics? What is your head pressure? Sounds like when going from the smaller size to the larger size, expansion is occurring at this connection instead of in the evap coil as it should and could be causing a restriction. When you have a cap tube system, low suction indicates either a low charge or a restriction as you indicated.