henry
@henry
•
Joined Sep 2019 •
Not recently active
Forum Replies Created
-
 That’s the basic stuff but over the years I also found some weird ones like them turning fans on when they were busy to try to stay cool and it would flicker the pilot flame and as the burner went out it would kill it
-
henry
MemberJanuary 31, 2019 at 8:25 pm in reply to: Manitowoc SD05002A ice machine magnetic bin switch replacement?And check for a good ground to the machine
-
henry
MemberJanuary 31, 2019 at 8:24 pm in reply to: Manitowoc SD05002A ice machine magnetic bin switch replacement?Magnetic door switches on the S series Manitowoc’s or tricky to diagnose you have to read microamps and open and close it at least 20 times to determine that’s the issue
-
henry
MemberJanuary 31, 2019 at 7:17 pm in reply to: Why is the top rim on prep cooler not getting cold?Yes if you give me a make and model I may be able to help you out but the first thing to do is check and see if the solenoid is energized
-
henry
MemberJanuary 31, 2019 at 7:12 pm in reply to: Does anyone have experience and/or advice on reworking an orifice down to a smaller size?If so send me a picture of the orifices the model and serial number of the groen oven and I can probably help you out
-
henry
MemberJanuary 31, 2019 at 7:10 pm in reply to: Does anyone have experience and/or advice on reworking an orifice down to a smaller size?Ar you converting from nat to propane?