Support / FAQs / About techtown

How can we help?

Table of Contents
< Back
You are here:

Lincoln Pizza Oven Repair & Installation for Authorized Technicians

Pizzerias and restaurants rely on durable ovens to bake pizza evenly and quickly. Fortunately, Lincoln manufacturers ovens that answer the bell. Many operators and managers call service technicians to fix and install their equipment. This guide features a quick table of contents and links to the Lincoln pizza oven repair and installation manual.

NOTE: This guide is ONLY for authorized technicians. Equipment operators should contact a local Lincoln service agent to conduct the tasks outlined below as well as additional repairs.

Check out the full Lincoln 1000 & 1200 Series Service Manual.

Lincoln Pizza Oven Replacement Procedures

Below is a table of context with procedures for Lincoln 1000-1200 Series Impinger Ovens. Please click on the link to access the full manual.

  • Replacing Temperature control potentiometer – page 38
  • Replacing the thermocouple – page 38
  • Replacing conveyor motor (Bodine) – page 42
  • Replacing conveyor motor (Baldor) – page 43
  • Replacing conveyor motor (Stepper) – page 43
  • Replacing hall effect sensor – page 50
  • Replacing temperature gauge – page 51
  • Replacing thermistor – page 51
  • Replacing the switch – page 54
  • Replacing & adjusting the air pressure switches – page 55
  • Replacing & adjusting the gas valve – page 55
  • Replacing the ignition control – page 56
  • Replacing the high-limit thermostat – page 56
  • Replacing the spark generator – page 56
  • Replacing solenoid valve – page 56
  • Replacing burner alarm – page 56
  • Replacing burner alarm light – page 57
  • Replacing pilot light (220V) page 57
  • Replacing igniter sensor assembly – page 57
  • Replacing burner blower motor – page 57
  • Replacing temperature control board (1030 model) page 57
  • Replacing temperature control potentiometer – page 58
  • Replacing burner blower motor relay assembly – page 58
  • Replacing temperature control (1046-1047 models) page 58
  • Replacing gas control relay (1046-1047 models) page 58
  • Replacing 20-minute time delay relay – page 58
  • Replacing & lubricating conveyor bearing – page 58

Check out the full Lincoln 1000 & 1200 Series Service Manual.

Lincoln Pizza Oven Removal & Assembly Procedures

From the control board and thermostat to the flame sensor and burner ignitor, this table of contents will help you locate all the necessary removal and installation procedures for Lincoln 1000-1200 Series Impinger Ovens.

  • Main fan motor – page 32
  • Capacitor motor – page 32
  • Main fan – pages 32-33
  • D.P.S.T. relay – page 33
  • Cool down switch – page 33
  • Control box cooling fan – page 33
  • Cooling fan thermostat – page 34
  • Burner blower motor – page 34
  • Burner blower wheel – page 35
  • Air pressure switch – page 35
  • Burner assembly – page 36
  • Gas control valve – page 36
  • Manifold pressure (adjustment) – page 37
  • Temperature control valve – page 37
  • Solenoid valve – page 37
  • Temperature control board – page 37
  • Mercury contactor – page 38
  • Heating element – page 39
  • Ignition control – page 39
  • Flame sensor – page 41
  • Burner ignitor – page 41
  • Transformer 120/24 VAC – page 41
  • Burner light (24 VAC on gas ovens) – page 41
  • Heat light (125 VAC on electric ovens) – page 41
  • Hi-limit thermostat (electric ovens) – page 41
  • Pilot orifice (burner) – page 42
  • Main orifice (burner) – page 42
  • Conveyor speed control potentiometer – page 42
  • Conveyor speed control dial (non-digital display) – page 42
  • Conveyor speed control dial (digital display) – page 42
  • Coupling & encoder disc – page 43
  • Optical encoder assembly – page 44
  • Tach. generator – page 44
  • Conveyor motor control board – page 44
  • D.C. motor control board calibration – pages 44-47
  • Stepper control adjustment – page 48
  • Reversing conveyor direction – page 49
  • Stepper drive system – page 49
  • Mini circuit breaker – page 49
  • Conveyor bearing (SN 100-2163) – page 49
  • Conveyor bearing (SN 100-2164 and above) – page 50
  • Stepper motor control transformer – page 50
  • Time/temp. display transformer – page 51
  • Switch settings – page 52

Check out the full Lincoln 1000 & 1200 Series Service Manual.